The Nordson MARCH AP-300 is a pre-owned plasma cleaning system supplied for surface-treatment processes in semiconductor and electronic manufacturing. The machine may be considered for applications where products require cleaning or surface preparation before a subsequent bonding, coating or assembly process.
Process suitability depends on the product, surface condition, required result and configuration of the available machine. Send your current equipment model, product photos and a short description of the process for an initial discussion.
Nordson MARCH AP-300 Machine Information
| Manufacturer | Nordson MARCH |
|---|---|
| Model | AP-300 |
| Equipment Type | Plasma cleaning and surface-treatment system |
| Application | Product cleaning and surface preparation before compatible manufacturing processes |
| Condition | Pre-owned equipment |
| Process Compatibility | Evaluated according to the product, treatment requirement and actual machine configuration |
| Available Configuration | Confirmed according to the specific machine offered |
| Delivery Scope | Based on the quotation and confirmed equipment list |
| Support | Initial fault review, replacement-part matching and repair discussion |
| Shipping | Export packing and worldwide delivery |
Process Fit and Initial Inquiry
An available AP-300 should not be assumed to suit every plasma-cleaning process. Treatment results can vary with the product material, surface contamination, loading method, process settings and installed machine components.
You do not need to prepare complete technical documentation for the first inquiry. Start by sending:
- Your current plasma-cleaning machine model, where applicable
- Clear photos of the product, substrate, package or leadframe
- The process performed before and after plasma treatment
- A brief description of the result or equipment problem you want to improve
Additional material, recipe or fixture information can be discussed later if the available machine appears relevant to the project.
Available Unit and Confirmed Delivery Scope
A pre-owned AP-300 may have been configured for a particular product or production process. The treatment chamber, product holders, control components, external equipment and supplied accessories may therefore differ between individual machines.
The specific machine configuration will be checked before quotation. Only the equipment, fixtures, cables and accessories listed in the quotation or confirmed delivery list are included.
Pumps, gas-control equipment, exhaust units, product fixtures, computers and other external systems should not be assumed to be included unless they are specifically stated.
Receiving, Startup and Sample Evaluation
The machine should be inspected and tested in stages before it is used with valuable production products.
- Inspect the packing, cabinet, treatment area, door, control panel, cables and visible connections for transport damage.
- Compare the received equipment and accessories with the confirmed delivery list.
- Confirm the electrical supply, grounding and other facility requirements of the actual machine before connection.
- Start the controller and record any alarm messages before resetting the system or changing settings.
- Confirm that the installed machine functions initialize and complete a basic cycle normally.
- Use suitable non-production samples for the first treatment check.
- Compare the treated result with the required process objective and repeat several cycles to review consistency.
Stop testing if the machine shows repeated alarms, unstable operation, abnormal noise or an unexpected process condition.
Process Stability, Alarms and Repair Support
If the treatment result is inconsistent, first record the product, selected process, operating stage and visible symptoms. Product loading, fixtures, internal contamination, machine components or process settings may all affect the result.
If an alarm occurs, keep a photo of the message before resetting the machine. Photos of the treatment area, product position and affected components, together with a short operating video where available, can help with an initial review.
Our team can assist with preliminary fault analysis, component identification and replacement-part matching. Further repair support can be discussed according to the actual machine condition, fault information and available parts.
Frequently Asked Questions
Can the Nordson MARCH AP-300 process our product?
This depends on the product material, surface condition, treatment objective and configuration of the available machine. Send product photos and a brief process description for an initial review.
Which process gases can be used with the AP-300?
The suitable gases depend on the installed machine configuration and intended process. Gas compatibility should be confirmed before connection or operation.
Are the pump and product fixtures included?
Only pumps, fixtures and accessories specifically listed in the quotation or confirmed delivery scope are included.
Is the used AP-300 ready for production?
Production readiness should be confirmed through installation, startup checks and repeated treatment of suitable non-production samples.
Can you assist if the machine has an alarm or unstable treatment result?
Yes. Send the machine model, alarm information, product photos, screen photos and an operating video where available. We can assist with initial fault review, parts matching and repair discussion.
Contact Us About the Nordson MARCH AP-300
Send your current machine model, product photos and a short description of the plasma-treatment requirement or equipment problem. We will review the basic information first and continue with the necessary machine, process, replacement-parts or repair details afterward.
