The Besi Fico AMS-LM is a pre-owned molding system used for semiconductor package encapsulation. Its actual molding configuration, installed mold, product-handling components and included accessories depend on the specific machine available.
For an initial inquiry, send your current machine model, a clear photo of the package, substrate or leadframe, and a short description of the required molding process. We can review the basic requirement first and continue with detailed mold and machine checks only when necessary.
Besi Fico AMS-LM Machine Information
| Manufacturer | Besi / Fico |
|---|---|
| Model | AMS-LM |
| Equipment Type | Semiconductor molding system |
| Application | Semiconductor package encapsulation and related product handling |
| Condition | Pre-owned semiconductor packaging equipment |
| Product Compatibility | Determined by the installed mold, product format and actual machine configuration |
| Molding Configuration | Confirmed according to the specific machine offered |
| Delivery Scope | Based on the quotation and confirmed equipment list |
| Support | Initial fault review, mold and parts matching, and repair discussion |
| Shipping | Export packing and worldwide delivery |
Product and Mold Compatibility
The availability of an AMS-LM does not automatically mean that it can process every semiconductor package. Compatibility depends on the product format, installed mold, cavity arrangement, handling components and required molding result.
You do not need to prepare complete technical documentation for the first inquiry. Start by sending:
- Your current molding-machine model, if the AMS-LM will replace existing equipment
- A clear photo of the package, substrate, strip or leadframe
- A photo of the existing mold or finished product where available
- A brief description of the molding requirement or current production problem
Detailed drawings, mold information and process requirements can be discussed later if the available machine appears relevant to the project.
Available Configuration and Delivery Scope
A pre-owned AMS-LM may have been configured for a particular product or production line. Its mold, loading mechanism, transfer components, molding stations, controller and output arrangement may therefore differ from another machine of the same model.
The actual configuration and included items will be confirmed according to the specific unit available. Only the equipment, molds, tools, cables and accessories listed in the quotation or confirmed delivery list are included.
Production molds, product fixtures, magazines, material-feeding equipment, computers and other external systems should not be assumed to be included unless they are specifically stated.
Receiving, Startup and Sample Molding Check
The machine should be inspected and tested in stages before valuable production materials are introduced.
- Inspect the packing, machine frame, molding sections, doors, guards, control panel and visible handling mechanisms.
- Photograph any impact marks, loose components, damaged cables or displaced assemblies before moving the machine.
- Compare the received machine, molds, tools and accessories with the confirmed delivery list.
- Check that installed molds and internal components remain secured after transportation.
- Confirm the required electrical supply, grounding and other facility conditions of the actual machine.
- Start the controller and record any alarm messages before resetting the system or changing parameters.
- Confirm that the machine initializes normally and run a dry cycle without production products or molding material.
- Observe loading, transfer, molding-unit movement, sensors and unloading throughout the cycle.
- After the dry cycle is stable, use suitable non-production samples and the correct mold for an initial molding test.
- Repeat several cycles to review machine stability and the consistency of the molded result.
Stop testing if mechanical interference, abnormal noise, unstable movement, leakage or repeated alarms are observed. Mold inspection and internal adjustment should only be performed after the equipment has been made safe by qualified personnel.
Molding Quality and Fault Review
Incomplete molding, excessive flash, cracks, contamination, product damage or unstable results may involve the product position, mold condition, material preparation, molding settings, handling mechanism or installed machine components.
Do not continue production if the mold does not operate correctly, products cannot be loaded or unloaded normally, mechanisms interfere with each other or the same alarm repeatedly returns.
Record the alarm message, affected station and operating stage before resetting the machine. Photos of the molded product, mold, product position and machine screen can provide a useful starting point for an initial review.
Mold, Repair and Replacement Parts Support
If the AMS-LM develops startup alarms, loading problems, molding defects or unloading faults, send the machine model, alarm information, product photos, mold photos and a short description of the issue.
Our team can assist with an initial fault review, mold and component identification, replacement-part matching and further repair discussion.
Related sensors, heaters, valves, motors, drivers, boards, cables, pneumatic components and product-handling assemblies can also be checked where available. The appropriate next step depends on the actual machine configuration and identified fault.
Frequently Asked Questions
Can the Besi Fico AMS-LM process our semiconductor package?
This depends on the product format, required molding result and mold installed on the available machine. Send a package, substrate or leadframe photo for an initial review.
Is a production mold included with the machine?
Only molds specifically listed in the quotation or confirmed delivery scope are included. Any supplied mold may have been designed for a particular product.
What equipment and accessories are included?
Only the machine, molds, tools, cables and accessories listed in the confirmed delivery scope are included.
Is the used AMS-LM ready for production?
Production readiness should be confirmed through installation, dry-cycle testing, mold inspection and repeated processing of suitable samples.
Can you assist if the machine has an alarm or molding defect?
Yes. Send the machine model, alarm information, molded-product and mold photos, and an operating video where available. We can assist with initial fault review, parts matching and repair discussion.
Contact Us About the Besi Fico AMS-LM
Send your current machine model, a product or leadframe photo and a short description of the required molding process or equipment problem. We will review the basic information first and continue with the necessary machine, mold, replacement-parts or repair details afterward.
