The Besi Fico FML is a pre-owned molding system supplied for semiconductor package encapsulation and related product-handling processes. Its actual molding method, installed mold, loading arrangement and output configuration depend on the specific machine available.
For an initial inquiry, send your current machine model, a clear package or product photo and a short description of the required molding process. We can review the basic requirement first and continue with detailed machine and mold checks only when necessary.
Besi Fico FML Machine Information
| Manufacturer | Besi / Fico |
|---|---|
| Model | FML |
| Equipment Type | Semiconductor molding system |
| Application | Semiconductor package encapsulation and related production handling |
| Condition | Pre-owned semiconductor packaging equipment |
| Product Compatibility | Determined by the installed mold, product format and machine configuration |
| Actual Configuration | Confirmed according to the specific machine available |
| Delivery Scope | Based on the quotation and confirmed equipment list |
| Support | Initial fault review, mold and parts matching, and repair discussion |
| Shipping | Export packing and worldwide delivery |
Product and Mold Compatibility
The availability of an FML system does not automatically mean that it can process every semiconductor product. Compatibility depends on the package or substrate format, installed mold, cavity arrangement, product-handling components and required molding result.
You only need to provide basic information for the first inquiry:
- Your current molding-machine model, if the FML will replace existing equipment
- A clear photo of the package, substrate, strip or leadframe
- A photo of the current mold or molded product where available
- A short description of the molding requirement or current production problem
Detailed drawings, mold data and process information can be discussed later if the available machine appears relevant to the project.
Available Machine and Delivery Scope
A pre-owned Fico FML may have been configured for a particular product or production line. Its mold, loading mechanism, material-handling components, controller and output arrangement may therefore differ from another machine with the same model name.
The actual configuration and included items will be confirmed according to the specific unit available. Only the machine, molds, tools, cables and accessories listed in the quotation or confirmed delivery list are included.
Production molds, product fixtures, magazines, material-feeding equipment, computers and other external systems should not be assumed to be included unless they are specifically stated.
Receiving, Startup and Sample Molding Check
The machine should be inspected and tested in stages before valuable products or production materials are introduced.
- Inspect the packing, machine frame, doors, guards, control panel and visible handling mechanisms.
- Photograph any impact marks, loose components, damaged cables or displaced assemblies before moving the machine.
- Compare the received machine, molds, tools and accessories with the confirmed delivery list.
- Check that installed molds and internal components remain secured after transportation.
- Confirm the required electrical supply, grounding and other facility conditions of the actual machine.
- Start the controller and record any alarm messages before resetting the system or changing parameters.
- Confirm that the machine initializes normally and complete a dry cycle without production products or molding material.
- Observe loading, transfer, mold movement, sensors and unloading throughout the operating sequence.
- After the dry cycle is stable, use suitable non-production samples and the correct mold for an initial molding test.
- Repeat several cycles to review machine stability and consistency of the molded result.
Stop testing if mechanical interference, abnormal noise, unstable movement, leakage or repeated alarms are observed. Mold inspection and internal adjustment should only be carried out after the machine has been made safe by qualified personnel.
Molding Results, Fault Review and Parts Support
Incomplete molding, excessive flash, cracks, contamination, product damage or unstable results may involve the product position, mold condition, material preparation, machine settings or installed handling components.
Do not continue production if the mold does not operate correctly, products cannot be loaded or unloaded normally, mechanisms interfere with each other or the same alarm repeatedly returns.
Record the alarm message, affected station and operating stage before resetting the machine. Photos of the molded product, mold, product position and machine screen can provide a useful starting point for an initial review.
Our team can assist with preliminary fault analysis, mold and component identification, replacement-part matching and further repair discussion. Related sensors, heaters, valves, motors, drivers, boards, cables, pneumatic parts and handling assemblies can also be checked where available.
Frequently Asked Questions
Can the Besi Fico FML process our semiconductor product?
This depends on the product format, required molding result and mold installed on the available machine. Send a package, substrate or leadframe photo for an initial review.
Which molding process does the available FML use?
The actual molding process should be confirmed from the specific machine, installed mold and material-handling configuration. It should not be assumed from the model name alone.
Is a production mold included with the machine?
Only molds specifically listed in the quotation or confirmed delivery scope are included. Any supplied mold may have been designed for a particular product.
Is the used FML ready for production?
Production readiness should be confirmed through installation, dry-cycle testing, mold inspection and repeated processing of suitable samples.
Can you assist if the machine has an alarm or molding problem?
Yes. Send the machine model, alarm information, molded-product and mold photos, and an operating video where available. We can assist with initial fault review, parts matching and repair discussion.
Contact Us About the Besi Fico FML
Send your current machine model, a product or leadframe photo and a short description of the required molding process or equipment problem. We will review the basic information first and continue with the necessary machine, mold, replacement-parts or repair details afterward.
